Stainless Carbon Steel Fin Tube Heat Exchanger For Power Plant Economizer

Stainless Carbon Steel Fin Tube Heat Exchanger For Power Plant Economizer

Product Description

Fin tubes is an important part of boiler for utility/power stantion plant.

Our products include Fin Tube,Extruded Fin tube,Welding Fin tube,L/LH Type Fin Tube,H Type Fin tube with Material A179/Alu1060,stainless steel,copper,copper nicke and so on.

Concrete parameters as below:

Advantage

1.Increase the heat transfer area outside the pipe

The fin tube extends the heat transfer area outside the light tube, and the convection heat transfer surface is composed of the extended surface and the light tube surface. Under the same shape size, the heat transfer area is much larger than that of the light tube, thus significantly improving the heat transfer capacity on the outside of the tube and the heat transfer efficiency of the coal saver.

2. Rounding of heat exchanger structure

The fin tube bundle increases the heat transfer area in the volume of the unit body, and reduces the volume of the heat exchanger when the heat transfer is the same.

3. Enhance heat transfer conditions

Fins to form small labyrinth of flue gas velocity field is a high middle and low on both sides, and the influence of the temperature field, small flue middle velocity will be higher, can increase air flow disturbance between fins, cause the flow boundary layer separation and cycle development, and thinning fins on the flow boundary layer and thermal boundary layer, shorten the length of flow boundary layer, helps to destroy the boundary layer of laminar sublayer, which have the effect of strengthening heat transfer.

4. Reduce the flow resistance of the fluid outside the pipe

In the direction of the fins and scouring of the airflow direction of fin parallel case, although the staggered fins bundles per row of ventilation resistance is about 1.2 times of the light pipe, under the same conditions, but in the dimension of tube bank fin is relatively light tube bundle each row of the increase of heat exchange area is far greater than 1.2 times, thus can reduce the number of tube bundle row, making the decrease in the total heat exchanger Yin force.At the same time, as the heat transfer capacity of the fin tube is greatly improved, the fluid velocity outside the tube can be appropriately reduced under the condition of ensuring the heat transfer capacity, while the flow resistance is generally proportional to the square of the velocity, so reducing the fluid velocity can reduce heat exchanger resistance and save operation cost.

Reduce heating surface wear

When the gas-solid two-phase fluid scours the heating surface, when the solid particles imbedded in the flow flow through the heat exchanger surface, the impact and cutting heat exchanger surface will cause the wear of the heating surface, and the wear amount is directly proportional to the cubic square of the fluid velocity.As the heat transfer capacity of the fin tube is improved, the velocity of the fluid outside the tube can be reduced and the wear of the heating surface can be greatly reduced.At the same time, the structure characteristics of the fin tube can enable the fluid flowing through the fin tube to form flow conditions conducive to reducing wear to a certain extent, thus weakening the numeral damage caused by the impact and cutting of small solid particles on the heating surface.

Specifications

In order to ensure that these units met customer expectations, a series of in-process testing was performed in accordance with Fin Tube Products' quality control system. In addition, the products' quality was also verified by an onsite independent testing company.

Certification

Hua Dong Boiler Co., Ltd. is a high-tech enterprise specialized in manufacturing boilers. Established in early 1985s, has two manufacturing bases, this company covers 400,000㎡ with fixed assets amounting to USD 110,000,000. There are 1100 employees including 150 technicians and 600 coded welders. Hua Dong holds the manufacturing licenses for Grade A boilers and Grade A1&A2 pressure vessels issued by Chinese General Administration of Quality Supervision, Inspection and Quarantine; also it holds the "S" and "U" "NB" stamps issued by American Society of Mechanical Engineers; meanwhile, this Company has passed the certification of ISO9001, SO3834, EN12952 Quality Management System.

"Hua Dong" boilers include Utility Boiler, HRSG Boiler, coal-fired , oil(gas) -fired, coal-water-slurry-fired and garbage-fired steam/hot water boilers, organic heat carrier boilers, etc., and Boiler spare parts (Economizer, Finned tube, Header, Steam drum, Superheater, Water wall panel, Air preheater, Cyclone separator, etc., which are widely used in power generation, heat supply, chemical engineering, textile, food, paper, road building, plastic, rubber and wood working industries. "HD" boilers are honored as "Famous Production in Jiangsu Province", " Jiangsu High-Tech Product" and "Jiangsu Energy-Saving Product". "HD" brand is a "Famous Brand in Jiangsu Province". We are a qualified supplier for the top three boiler manufacturers in China(Harbin Boiler Co., Ltd., Dong Fang Boiler Group Co., Ltd., Shanghai Boiler Works Ltd.,). So far, Hua Dong Boilers have served 10000 customers, which sell well all over China and are exported to USA, Australia, Russia, Kazakhstan, India, Indonesia, South Africa, Brazil, and Southeast Asia.

We strive to manufacture "Safe, Efficient, Energy-Saving and Environment-Friendly" boilers, provide new-type products in excellent quality, serve users sincerely to their satisfaction, and be a top supplier of boilers in China.

Declaration

Zhangjiagang Hua Dong Boiler Co.,Ltd has no subsidiaries. 

Packaging & Shipping

Company Business

Our products have been wildly used in power plants and large international companies overseas.